Will fit Left hand drive busses from 1967 to 1972
This kit is an upgrade from the old worn out original unit (fits under the throttle pedal in the cab area).
Also this kit gives a smoother pedal action and a spring return on the throttle pedal itself.
Swivel joints on the pushrod from the pedal, and a sealed roller bearing in the main mount. The return spring stops you having to add extra springs on the carb`s.
Kit comes a return spring plus you now get the small 8mm spanner to help with fitting the joint to the pedal.Also a new addition is a return screw that once you have set the kit itself you can screw up to just nudge against the floor as a return stop . Later models came as standard , but i have added these to the early models as well now .
DO NOT CLAMP YOUR THROTTLE CABLE, TIGHTEN THEN UNDO HALF A TURN. CABLE END NEEDS TO ROTATE FREELY.